Masonry Contractor in NYC

Sardar Restoration Corp repairs and restores building exteriors across Manhattan, Brooklyn, Queens and the Bronx, plus Westchester County and Yonkers. Brickwork, facades, stucco, roofing, waterproofing, fire escapes and the compliance work New York City buildings require. Licensed, insured, and filing directly with the Department of Buildings.

What Makes Masonry Work in New York City Different

Exterior repair here is shaped by three things you do not face elsewhere: the age of the building stock, the difficulty of reaching the wall, and the regulatory layer over both.

Pre-war brick needs pre-war mortar

Buildings from before 1945 use soft brick and lime mortar that lets moisture escape through the joints. Repoint with Portland cement and the brick face spalls instead.

Access is half the job

No lay-down space, and a public sidewalk under the work. Sheds and scaffolding are filed, permitted and rented monthly, often the largest line item.

Exterior work carries a compliance layer

Most structural work needs DOB filing first, and unpermitted work is itself a violation. Buildings over six stories fall under Local Law 11 of 1998.

Freeze-thaw drives the damage

Water in an open joint freezes, widens the gap, then admits more on the next cycle. Small defects escalate fast, so open joints are worth closing before winter.

Licensed, Insured and Filing Directly with the DOB

Sardar Restoration Corp is a licensed and insured contractor working across New York City, carrying general liability and workers' compensation on every project. We file directly with the Department of Buildings rather than routing filings through a third party, so permits, sidewalk shed applications and violation corrections all sit with one company. Our permit history is public record: 33 filings representing approximately $1.67 million in permitted construction. The company is led by Muhammad Ali.

Verified on:

Masonry and Restoration Services in NYC

Exterior repair, restoration and compliance work for New York City buildings, from the brick to the roof to the paperwork.

Serving Every Borough of New York City

We work across Manhattan, Brooklyn, Queens and the Bronx, plus Westchester County and Yonkers. Each area has its own page with local building stock and the full service list.

Serving Every Corner of NYC

Why Building Owners in NYC Work With Us

We File Our Own DOB Permits

Mortar Matched to Your Building

33 Permits on Public Record

NYC Projects

Restoration and repair work completed across the five boroughs.

What NYC Building Owners Say

Frequently Asked Questions

Do I need a licensed contractor for masonry work in New York City?

For most exterior work, yes. Structural repairs, facade work, parapet work and fire escape alterations all require filing with the Department of Buildings, and filings must come from a licensed party. An unlicensed contractor cannot pull permits, which means the work becomes a violation attached to your building rather than to them.

What permits does exterior work in NYC require?

It depends on scope. Structural repairs, facade work, parapet rebuilding and fire escape alterations generally require DOB permits. Sidewalk sheds and scaffolding require their own filings. Landmarked buildings and properties in historic districts need Landmarks Preservation Commission approval before the DOB will act. Routine maintenance such as painting usually does not require filing.

Why does masonry work cost more in New York than elsewhere?

Access. On most NYC buildings there is no space to park a lift and a public sidewalk sits directly under the work, so sidewalk sheds or scaffolding are required and rented monthly for the length of the project. On multi-story buildings that is often the largest line item. Labor rates, insurance requirements and permit costs add to it, but access is the main driver.

Can you match the mortar on a pre-war building?

Yes, and on pre-war masonry it matters more than almost anything else. Older New York buildings used soft brick and lime-based mortar designed to let moisture escape through the joints. Repointing with modern Portland cement creates joints harder than the brick, so moisture exits through the brick face instead and the face spalls. We match mortar type, strength and color to the original.

When is the best time of year for masonry work in NYC?

Roughly April through November. Mortar needs temperatures above about 40 degrees Fahrenheit to cure properly, so winter work requires heated enclosures and costs more. Inspection, filing and permitting can all happen over the winter, so booking then usually means better scheduling than calling in spring.

Which parts of New York City do you cover?

All five boroughs, plus Westchester County and Yonkers. Our office is in the Bronx. Each area has its own page with the full service list for that location.

Do you work on residential or commercial buildings?

Both. Single-family homes, brownstones and rowhouses, multi-family walk-ups, apartment buildings, co-ops and condos, commercial property, churches and landmarked buildings. Multi-family and commercial make up the larger share, because those are the buildings carrying the compliance requirements that drive most exterior work in New York.